r/h rosinhub.
LAB TELEMETRY: ACTIVE
EN ES DE
Dabpress // Home Hydraulic ENGINEERING REVIEW

Dabpress 6-Ton 3x5 Dual-PID Anodized Rosin Press Review: Platen PSI, Telemetry & Lab Score

The Dabpress 6-Ton 3x5 Dual-PID Anodized Rosin Press (Dabpress) delivers 6.0 tons (12,000 lbs) of force across 3.0 x 5.0 inch platens (15.0 sq in), generating up to 800 Platen PSI and 1,500 True Bag PSI on a 2.0 x 4.0 in (8.0 sq in) filter bag. It earns a 9.4/10 RosinHub RTINGS Lab Score and is engineered for best value home grower press with independent upper/lower pid controllers.

← All 40 Hardware Reviews Calculate True Bag PSI
Dabpress TELEMETRY CARD

Dabpress 6-Ton 3x5 Dual-PID Anodized Rosin Press

9.4
RTINGS SCORE
Dabpress 6-Ton 3x5 Dual-PID Anodized Rosin Press
True Bag PSI Accuracy
9.0
Thermal Uniformity
9.3
Cost-Per-Gram Value
9.9

Verified Engineering Specification Sheet: Dabpress 6-Ton 3x5 Dual-PID Anodized Rosin Press

Engineering Parameter Measured / Manufacturer Specification Solventless Lab Notes
Manufacturer BrandDabpressAudited in RosinHub 40-Model Reference Index
Equipment CategoryHome HydraulicBest value home grower press with independent upper/lower PID controllers
Actuation ArchitectureReplaceable Bottle JackNo Gauge (Use Bag PSI Calculator)
Max Ram Force6.0 Tons (12,000 lbs)Throttle to 650-1,050 Bag PSI for flower; 300-600 Bag PSI for hash
Platen / Shelf Dimensions3.0 x 5.0 inches (15.0 sq in)6061-T6 / 304 Stainless Thermal Surface
Max Platen-Level PSI800 PSIForce divided by full platen surface area
Recommended Micron Bag2.0 x 4.0 in (8.0 sq in)Leaves 0.5-inch perimeter escape channel around bag
Max Bag-Level PSI1,500 PSITrue pressure on bag footprint at maximum tonnage
Max Batch Capacity10.5 grams per cycleOptimal single-cycle load
Heater / System Wattage500 WattsDual-PID closed-loop thermal recovery
Factory Warranty1-Year WarrantyManufacturer coverage
Reference MSRP (USD)$369Reference manufacturer pricing (RosinHub does not sell hardware)

Interactive Platen & Bag Footprint PSI Calculator

Interactive Rosin Platen & Bag Footprint PSI Calculator

Calculate both Platen-Level PSI and True Bag-Level PSI. Hydraulic gauge pressure is NOT bag PSI: a 10-ton press on a 2x4 inch bag delivers 2,500 PSI at the mesh, which will cause an instant blowout unless throttled.

Platen Area
15.0 sq in
Platen-Level PSI
533 PSI
Actual Bag-Level PSI
1000 PSI
Ideal Ram Target
3.40 Tons (6800 lbs)
Safety Verdict
OPTIMAL SOLVENTLESS ZONE
Related Head-to-Head VS Comparisons
Post-Press Decarb, Vape & Wash Yield Tools